一、概述
通过adb命令可获取bugrepport信息，并输出到文件当前路径的bugreport.txt文件：
adb bugreport > bugreport.txt
对于Android系统调试分析，bugreport信息量非常之大，几乎涵盖整个系统各个层面内容，对于分析BUG是一大利器，本文先从从源码角度来分析一下Bugreport的实现原理。
二、原理分析
Android系统源码中framework/native/cmds/bugreport目录通过Android.mk定义了bugreport项目，在系统编译完成后会生成bugreport可执行文件，位于系统/system/bin/bugreport。当执行adb bugreport时，便会调用这个可执行文件，进入bugreport.cpp中的main()方法。
2.1 bugreport.main
[-> bugreport.cpp]
int main() { //启动dumpstate服务
property_set("ctl.start", "dumpstate"); //需要多次尝试，直到dumpstate服务启动完成，才能建立socket通信
int s; for (int i = 0; i < 20; i++) {
s = socket_local_client("dumpstate", ANDROID_SOCKET_NAMESPACE_RESERVED,
SOCK_STREAM); if (s >= 0) break; //休眠1s后再次尝试连接
sleep(1);
} if (s == -1) {
printf("Failed to connect to dumpstate service: %s\n", strerror(errno)); return 1;
} //当3分钟没有任何数据可读，则超时停止读取并退出。
//dumpstate服务中不存在大于1分钟的timetout，因而不可预见的超时的情况下留有很大的回旋余地。
struct timeval tv;
tv.tv_sec = 3 * 60;
tv.tv_usec = 0; if (setsockopt(s, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) == -1) {
printf("WARNING: Cannot set socket timeout: %s\n", strerror(errno));
} while (1) { char buffer[65536];
ssize_t bytes_read = TEMP_FAILURE_RETRY(read(s, buffer, sizeof(buffer))); if (bytes_read == 0) { break;
} else if (bytes_read == -1) { // EAGAIN意味着timeout，Bugreport读异常终止
if (errno == EAGAIN) {
errno = ETIMEDOUT;
} break;
}
ssize_t bytes_to_send = bytes_read;
ssize_t bytes_written; //不断循环得将读取数据输出到stdout
do {
bytes_written = TEMP_FAILURE_RETRY(write(STDOUT_FILENO,
buffer + bytes_read - bytes_to_send, bytes_to_send)); if (bytes_written == -1) { return 1; //将数据无法写入stdout
}
bytes_to_send -= bytes_written;
} while (bytes_written != 0 && bytes_to_send > 0);
}
close(s); return 0;
}该过程先启动dumpstate服务，Bugreport再通过socket建立于dumpstate的通信，这个过程会尝试20次socket连接建立直到成功连接。 在socket通道中如果持续3分钟没有任何数据可读，则超时停止读取并退出。由于dumpstate服务中不存在大于1分钟的timetout，因而不可预见的超时的情况下留有很大的回旋余地。
当从socket读取到数据后，写入到标准时输出或者重定向到文件。可见bugreport数据的来源都是dumpstate服务，那么接下来去看看dumpstate服务的工作。
2.2 dumpstate.main
[-> dumpstate.cpp]
int main(int argc, char *argv[]) { struct sigaction sigact; int do_add_date = 0; int do_vibrate = 1; char* use_outfile = 0; int use_socket = 0; int do_fb = 0; int do_broadcast = 0; if (getuid() != 0) { //兼容性考虑，旧版本支持直接调用dumpstate命令，新版本通过调用/system/bin/bugreport来替代。
//当检测到直接调用，则强制执行bugreport命令。
return execl("/system/bin/bugreport", "/system/bin/bugreport", NULL);
}
ALOGI("begin\n"); //清空句柄SIGPIPE
memset(&sigact, 0, sizeof(sigact));
sigact.sa_handler = sigpipe_handler;
sigaction(SIGPIPE, &sigact, NULL); //提高当前进程的优先级，防止被OOM Killer杀死
setpriority(PRIO_PROCESS, 0, -20);
FILE *oom_adj = fopen("/proc/self/oom_adj", "we"); if (oom_adj) {
fputs("-17", oom_adj);
fclose(oom_adj);
} //参数解析
int c; while ((c = getopt(argc, argv, "dho:svqzpB")) != -1) { switch (c) { case 'd': do_add_date = 1; break; case 'o': use_outfile = optarg; break; case 's': use_socket = 1; break; case 'v': break; // compatibility no-op
case 'q': do_vibrate = 0; break; case 'p': do_fb = 1; break; case 'B': do_broadcast = 1; break; case '?': printf("\n"); case 'h':
usage();
exit(1);
}
} //建立socket
if (use_socket) {
redirect_to_socket(stdout, "dumpstate");
} //打开vibrator
FILE *vibrator = 0; if (do_vibrate) {
vibrator = fopen("/sys/class/timed_output/vibrator/enable", "we"); if (vibrator) {
vibrate(vibrator, 150);
}
} //读取/proc/cmdline
FILE *cmdline = fopen("/proc/cmdline", "re"); if (cmdline != NULL) {
fgets(cmdline_buf, sizeof(cmdline_buf), cmdline);
fclose(cmdline);
} //收集虚拟机和native进程的stack traces(需要root权限)
dump_traces_path = dump_traces(); //获取tombstone文件描述符
get_tombstone_fds(tombstone_data); //确保capabilities
if (prctl(PR_SET_KEEPCAPS, 1) < 0) {
ALOGE("prctl(PR_SET_KEEPCAPS) failed: %s\n", strerror(errno)); return -1;
} //切换到非root用户和组，在切换之前都是处于root权限
gid_t groups[] = { AID_LOG, AID_SDCARD_R, AID_SDCARD_RW,
AID_MOUNT, AID_INET, AID_NET_BW_STATS }; if (setgroups(sizeof(groups)/sizeof(groups[0]), groups) != 0) {
ALOGE("Unable to setgroups, aborting: %s\n", strerror(errno)); return -1;
} if (setgid(AID_SHELL) != 0) {
ALOGE("Unable to setgid, aborting: %s\n", strerror(errno)); return -1;
} if (setuid(AID_SHELL) != 0) {
ALOGE("Unable to setuid, aborting: %s\n", strerror(errno)); return -1;
} struct __user_cap_header_struct capheader; struct __user_cap_data_struct capdata[2];
memset(&capheader, 0, sizeof(capheader));
memset(&capdata, 0, sizeof(capdata));
capheader.version = _LINUX_CAPABILITY_VERSION_3;
capheader.pid = 0;
capdata[CAP_TO_INDEX(CAP_SYSLOG)].permitted = CAP_TO_MASK(CAP_SYSLOG);
capdata[CAP_TO_INDEX(CAP_SYSLOG)].effective = CAP_TO_MASK(CAP_SYSLOG);
capdata[0].inheritable = 0;
capdata[1].inheritable = 0; if (capset(&capheader, &capdata[0]) < 0) {
ALOGE("capset failed: %s\n", strerror(errno)); return -1;
} //如果需要，则重定向输出
char path[PATH_MAX], tmp_path[PATH_MAX];
pid_t gzip_pid = -1; if (!use_socket && use_outfile) {
strlcpy(path, use_outfile, sizeof(path)); if (do_add_date) { char date[80];
time_t now = time(NULL);
strftime(date, sizeof(date), "-%Y-%m-%d-%H-%M-%S", localtime(&now));
strlcat(path, date, sizeof(path));
} if (do_fb) {
strlcpy(screenshot_path, path, sizeof(screenshot_path));
strlcat(screenshot_path, ".png", sizeof(screenshot_path));
}
strlcat(path, ".txt", sizeof(path));
strlcpy(tmp_path, path, sizeof(tmp_path));
strlcat(tmp_path, ".tmp", sizeof(tmp_path));
redirect_to_file(stdout, tmp_path);
} //这里是真正干活的地方 【见小节 3.3】
dumpstate(); //通过震动提醒已完成所有dump操作
if (vibrator) { for (int i = 0; i < 3; i++) {
vibrate(vibrator, 75);
usleep((75 + 50) * 1000);
}
fclose(vibrator);
} //等待gzip的完成，等进程退出时则会被杀
if (gzip_pid > 0) {
fclose(stdout);
waitpid(gzip_pid, NULL, 0);
} //重命名.tmp文件到最终位置
if (use_outfile && rename(tmp_path, path)) {
fprintf(stderr, "rename(%s, %s): %s\n", tmp_path, path, strerror(errno));
} //通过发送广播告知ActivityManager已完成bugreport操作
if (do_broadcast && use_outfile && do_fb) {
run_command(NULL, 5, "/system/bin/am", "broadcast", "--user", "0", "-a", "android.intent.action.BUGREPORT_FINISHED", "--es", "android.intent.extra.BUGREPORT", path, "--es", "android.intent.extra.SCREENSHOT", screenshot_path, "--receiver-permission", "android.permission.DUMP", NULL);
}
ALOGI("done\n"); return 0;
}整个过程的工作流程：
提高执行dumpsate所在进程的优先级，防止被OOM Killer杀死；
参数解析，可通过命令
adb shell dumpstate -h查看dumpstate命令所支持的参数；打开vibrator，用于在执行bugreport时，手机会先震动一下用于提醒开始抓取系统信息；
通过dump_traces()来完成收集虚拟机和native进程的stack traces；
通过get_tombstone_fds来获取tombstone文件描述符；
开始执行切换到非root用户和组，在这之前的执行都处于root权限；
执行dumpstate()，这里是真正干活的地方；
再次通过震动以提醒dump操作执行完成；
发送广播，告知ActivityManager已完成bugreport操作。
接下来就重点说说dumpstate()功能：
2.3 dumpstate
该方法负责整个bugreport内容输出的最为核心的功能。
[-> dumpstate.cpp ]
static void dumpstate() {
...
property_get("ro.build.display.id", build, "(unknown)");
property_get("ro.build.fingerprint", fingerprint, "(unknown)");
property_get("ro.build.type", build_type, "(unknown)");
property_get("ro.baseband", radio, "(unknown)");
property_get("ro.bootloader", bootloader, "(unknown)");
property_get("gsm.operator.alpha", network, "(unknown)");
strftime(date, sizeof(date), "%Y-%m-%d %H:%M:%S", localtime(&now)); //开头信息
printf("========================================================\n"); printf("== dumpstate: %s\n", date); printf("========================================================\n"); printf("\n"); printf("Build: %s\n", build); printf("Build fingerprint: '%s'\n", fingerprint); printf("Bootloader: %s\n", bootloader); printf("Radio: %s\n", radio); printf("Network: %s\n", network); printf("Kernel: "); dump_file(NULL, "/proc/version"); printf("Command line: %s\n", strtok(cmdline_buf, "\n")); printf("\n"); //记录系统运行时长和休眠时长
run_command("UPTIME", 10, "uptime", NULL); //输出mmcblk0设备信息
dump_files("UPTIME MMC PERF", mmcblk0, skip_not_stat, dump_stat_from_fd);
dump_file("MEMORY INFO", "/proc/meminfo");
run_command("CPU INFO", 10, "top", "-n", "1", "-d", "1", "-m", "30", "-t", NULL);
run_command("PROCRANK", 20, "procrank", NULL);
dump_file("VIRTUAL MEMORY STATS", "/proc/vmstat");
dump_file("VMALLOC INFO", "/proc/vmallocinfo");
dump_file("SLAB INFO", "/proc/slabinfo");
dump_file("ZONEINFO", "/proc/zoneinfo");
dump_file("PAGETYPEINFO", "/proc/pagetypeinfo");
dump_file("BUDDYINFO", "/proc/buddyinfo");
dump_file("FRAGMENTATION INFO", "/d/extfrag/unusable_index");
dump_file("KERNEL WAKELOCKS", "/proc/wakelocks");
dump_file("KERNEL WAKE SOURCES", "/d/wakeup_sources");
dump_file("KERNEL CPUFREQ", "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state");
dump_file("KERNEL SYNC", "/d/sync");
run_command("PROCESSES", 10, "ps", "-P", NULL);
run_command("PROCESSES AND THREADS", 10, "ps", "-t", "-p", "-P", NULL);
run_command("PROCESSES (SELINUX LABELS)", 10, "ps", "-Z", NULL);
run_command("LIBRANK", 10, "librank", NULL); //输出kernel log
do_dmesg(); //所有已打开文件
run_command("LIST OF OPEN FILES", 10, SU_PATH, "root", "lsof", NULL); //遍历所有进程的show map
for_each_pid(do_showmap, "SMAPS OF ALL PROCESSES"); //显示所有线程的blocked位置
for_each_tid(show_wchan, "BLOCKED PROCESS WAIT-CHANNELS"); //SYSTEM LOG
timeout = logcat_timeout("main") + logcat_timeout("system") + logcat_timeout("crash"); if (timeout < 20000) {
timeout = 20000;
}
run_command("SYSTEM LOG", timeout / 1000, "logcat", "-v", "threadtime", "-d", "*:v", NULL); //EVENT LOG
timeout = logcat_timeout("events"); if (timeout < 20000) {
timeout = 20000;
}
run_command("EVENT LOG", timeout / 1000, "logcat", "-b", "events", "-v", "threadtime", "-d", "*:v", NULL); //RADIO LOG
timeout = logcat_timeout("radio"); if (timeout < 20000) {
timeout = 20000;
}
run_command("RADIO LOG", timeout / 1000, "logcat", "-b", "radio", "-v", "threadtime", "-d", "*:v", NULL); //Log统计信息
run_command("LOG STATISTICS", 10, "logcat", "-b", "all", "-S", NULL); //输出当前虚拟机和native进程的vm traces
if (dump_traces_path != NULL) {
dump_file("VM TRACES JUST NOW", dump_traces_path);
} //输出上次发生ANR时vm traces，即路径/data/anr/traces.txt
struct stat st; char anr_traces_path[PATH_MAX];
property_get("dalvik.vm.stack-trace-file", anr_traces_path, ""); if (!anr_traces_path[0]) { printf("*** NO VM TRACES FILE DEFINED (dalvik.vm.stack-trace-file)\n\n");
} else { int fd = TEMP_FAILURE_RETRY(open(anr_traces_path,
O_RDONLY | O_CLOEXEC | O_NOFOLLOW | O_NONBLOCK)); if (fd < 0) { printf("*** NO ANR VM TRACES FILE (%s): %s\n\n", anr_traces_path, strerror(errno));
} else {
dump_file_from_fd("VM TRACES AT LAST ANR", anr_traces_path, fd);
}
} //输出慢操作的vm traces，例如/data/anr/slow1.txt
if (anr_traces_path[0] != 0) { int tail = strlen(anr_traces_path)-1; while (tail > 0 && anr_traces_path[tail] != '/') {
tail--;
} int i = 0; while (1) { //例如trace文件为/data/anr/slow1.txt
sprintf(anr_traces_path+tail+1, "slow%02d.txt", i); if (stat(anr_traces_path, &st)) { break;
}
dump_file("VM TRACES WHEN SLOW", anr_traces_path);
i++;
}
} //输出tombstone信息，NUM_TOMBSTONES=10，例如/data/tombstones/tombstone_1
int dumped = 0; for (size_t i = 0; i < NUM_TOMBSTONES; i++) { if (tombstone_data[i].fd != -1) {
dumped = 1;
dump_file_from_fd("TOMBSTONE", tombstone_data[i].name, tombstone_data[i].fd);
tombstone_data[i].fd = -1;
}
} if (!dumped) { printf("*** NO TOMBSTONES to dump in %s\n\n", TOMBSTONE_DIR);
}
dump_file("NETWORK DEV INFO", "/proc/net/dev");
dump_file("QTAGUID NETWORK INTERFACES INFO", "/proc/net/xt_qtaguid/iface_stat_all");
dump_file("QTAGUID NETWORK INTERFACES INFO (xt)", "/proc/net/xt_qtaguid/iface_stat_fmt");
dump_file("QTAGUID CTRL INFO", "/proc/net/xt_qtaguid/ctrl");
dump_file("QTAGUID STATS INFO", "/proc/net/xt_qtaguid/stats"); //输出上次的kernel log
if (!stat(PSTORE_LAST_KMSG, &st)) { //文件为/sys/fs/pstore/console-ramoops
dump_file("LAST KMSG", PSTORE_LAST_KMSG);
} else { //文件为/proc/last_kmsg
dump_file("LAST KMSG", "/proc/last_kmsg");
} //输出上次 logcat，内核必须设置CONFIG_PSTORE_PMSG
run_command("LAST LOGCAT", 10, "logcat", "-L", "-v", "threadtime", "-b", "all", "-d", "*:v", NULL); //wifi驱动/固件 以及ip相关信息
run_command("NETWORK INTERFACES", 10, "ip", "link", NULL);
run_command("IPv4 ADDRESSES", 10, "ip", "-4", "addr", "show", NULL);
run_command("IPv6 ADDRESSES", 10, "ip", "-6", "addr", "show", NULL);
run_command("IP RULES", 10, "ip", "rule", "show", NULL);
run_command("IP RULES v6", 10, "ip", "-6", "rule", "show", NULL);
dump_route_tables();
run_command("ARP CACHE", 10, "ip", "-4", "neigh", "show", NULL);
run_command("IPv6 ND CACHE", 10, "ip", "-6", "neigh", "show", NULL);
run_command("IPTABLES", 10, SU_PATH, "root", "iptables", "-L", "-nvx", NULL);
run_command("IP6TABLES", 10, SU_PATH, "root", "ip6tables", "-L", "-nvx", NULL);
run_command("IPTABLE NAT", 10, SU_PATH, "root", "iptables", "-t", "nat", "-L", "-nvx", NULL);
run_command("IPTABLE RAW", 10, SU_PATH, "root", "iptables", "-t", "raw", "-L", "-nvx", NULL);
run_command("IP6TABLE RAW", 10, SU_PATH, "root", "ip6tables", "-t", "raw", "-L", "-nvx", NULL);
run_command("WIFI NETWORKS", 20, SU_PATH, "root", "wpa_cli", "IFNAME=wlan0", "list_networks", NULL); //中断向量表
dump_file("INTERRUPTS (1)", "/proc/interrupts");
run_command("NETWORK DIAGNOSTICS", 10, "dumpsys", "connectivity", "--diag", NULL); //中断向量表(二次输出)
dump_file("INTERRUPTS (2)", "/proc/interrupts"); //获取properties属性值
print_properties();
run_command("VOLD DUMP", 10, "vdc", "dump", NULL);
run_command("SECURE CONTAINERS", 10, "vdc", "asec", "list", NULL); //可用空间
run_command("FILESYSTEMS & FREE SPACE", 10, "df", NULL);
run_command("LAST RADIO LOG", 10, "parse_radio_log", "/proc/last_radio_log", NULL); //背光信息
printf("------ BACKLIGHTS ------\n"); printf("LCD brightness="); dump_file(NULL, "/sys/class/leds/lcd-backlight/brightness"); printf("Button brightness="); dump_file(NULL, "/sys/class/leds/button-backlight/brightness"); printf("Keyboard brightness="); dump_file(NULL, "/sys/class/leds/keyboard-backlight/brightness"); printf("ALS mode="); dump_file(NULL, "/sys/class/leds/lcd-backlight/als"); printf("LCD driver registers:\n"); dump_file(NULL, "/sys/class/leds/lcd-backlight/registers"); printf("\n"); //Binder相关
dump_file("BINDER FAILED TRANSACTION LOG", "/sys/kernel/debug/binder/failed_transaction_log");
dump_file("BINDER TRANSACTION LOG", "/sys/kernel/debug/binder/transaction_log");
dump_file("BINDER TRANSACTIONS", "/sys/kernel/debug/binder/transactions");
dump_file("BINDER STATS", "/sys/kernel/debug/binder/stats");
dump_file("BINDER STATE", "/sys/kernel/debug/binder/state"); printf("========================================================\n"); printf("== Board\n"); printf("========================================================\n");
dumpstate_board(); printf("\n"); //输出framework各种服务的dumpsys信息
printf("========================================================\n"); printf("== Android Framework Services\n"); printf("========================================================\n");
run_command("DUMPSYS", 60, "dumpsys", NULL); //很耗时则timeout=60s
printf("========================================================\n"); printf("== Checkins\n"); printf("========================================================\n");
run_command("CHECKIN BATTERYSTATS", 30, "dumpsys", "batterystats", "-c", NULL);
run_command("CHECKIN MEMINFO", 30, "dumpsys", "meminfo", "--checkin", NULL);
run_command("CHECKIN NETSTATS", 30, "dumpsys", "netstats", "--checkin", NULL);
run_command("CHECKIN PROCSTATS", 30, "dumpsys", "procstats", "-c", NULL);
run_command("CHECKIN USAGESTATS", 30, "dumpsys", "usagestats", "-c", NULL);
run_command("CHECKIN PACKAGE", 30, "dumpsys", "package", "--checkin", NULL); //输出当前 运行中activity/service/provider信息
printf("========================================================\n"); printf("== Running Application Activities\n"); printf("========================================================\n");
run_command("APP ACTIVITIES", 30, "dumpsys", "activity", "all", NULL); printf("========================================================\n"); printf("== Running Application Services\n"); printf("========================================================\n");
run_command("APP SERVICES", 30, "dumpsys", "activity", "service", "all", NULL); printf("========================================================\n"); printf("== Running Application Providers\n"); printf("========================================================\n");
run_command("APP SERVICES", 30, "dumpsys", "activity", "provider", "all", NULL); printf("========================================================\n"); printf("== dumpstate: done\n"); printf("========================================================\n");
}该方法涉及run_command其他几个方法见下方：
2.3.1 run_command()
[-> utils.c]
int run_command(const char *title, int timeout_seconds, const char *command, ...) {
fflush(stdout); uint64_t start = nanotime(); //通过fork创建子进程
pid_t pid = fork(); if (pid < 0) { printf("*** fork: %s\n", strerror(errno));
return pid;
} //子进程执行
if (pid == 0) { const char *args[1024] = {command}; size_t arg; //确保dumpstate结束后能关闭子进程
prctl(PR_SET_PDEATHSIG, SIGKILL); struct sigaction sigact; memset(&sigact, 0, sizeof(sigact));
sigact.sa_handler = SIG_IGN; //忽略SIGPIPE
sigaction(SIGPIPE, &sigact, NULL);
va_list ap;
va_start(ap, command); if (title) printf("------ %s (%s", title, command); for (arg = 1; arg < sizeof(args) / sizeof(args[0]); ++arg) {
args[arg] = va_arg(ap, const char *); if (args[arg] == NULL) break; if (title) printf(" %s", args[arg]);
} if (title) printf(") ------\n");
fflush(stdout); //执行命令
execvp(command, (char**) args); printf("*** exec(%s): %s\n", command, strerror(errno));
fflush(stdout);
_exit(-1); //进程退出
} //父进程执行，主要处理子进程退出
int status; bool ret = waitpid_with_timeout(pid, timeout_seconds, &status); uint64_t elapsed = nanotime() - start; if (!ret) { if (errno == ETIMEDOUT) { printf("*** %s: Timed out after %.3fs (killing pid %d)\n", command,
(float) elapsed / NANOS_PER_SEC, pid);
} else { printf("*** %s: Error after %.4fs (killing pid %d)\n", command,
(float) elapsed / NANOS_PER_SEC, pid);
}
kill(pid, SIGTERM); if (!waitpid_with_timeout(pid, 5, NULL)) {
kill(pid, SIGKILL); if (!waitpid_with_timeout(pid, 5, NULL)) { printf("*** %s: Cannot kill %d even with SIGKILL.\n", command, pid);
}
}
return -1;
} if (WIFSIGNALED(status)) { printf("*** %s: Killed by signal %d\n", command, WTERMSIG(status));
} else if (WIFEXITED(status) && WEXITSTATUS(status) > 0) { printf("*** %s: Exit code %d\n", command, WEXITSTATUS(status));
} if (title) printf("[%s: %.3fs elapsed]\n\n", command, (float)elapsed / NANOS_PER_SEC);
return status;
}功能是fork子进程并等待它执行完成，或者超时退出。当命令title不为空时，每次输出结果，都分别以下面作为开头和结尾:
------ <title> (<command>) ------ [<command>: <执行时长> elapsed]
2.3.2 dump_file()
[-> utils.c]
int dump_file(const char *title, const char *path) { //尝试打开文件
int fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); if (fd < 0) { //无法打开文件时，则输出如下信息
int err = errno; if (title) printf("------ %s (%s) ------\n", title, path); printf("*** %s: %s\n", path, strerror(err)); if (title) printf("\n");
return -1;
} //输出文件内容
return _dump_file_from_fd(title, path, fd);
}当可以正确打开文件时，则执行_dump_file_from_fd，输出文件内容
static int _dump_file_from_fd(const char *title, const char *path, int fd) { if (title) printf("------ %s (%s", title, path); if (title) { struct stat st; //文件路径为/proc/或者/sys/
if (memcmp(path, "/proc/", 6) && memcmp(path, "/sys/", 5) && !fstat(fd, &st)) { char stamp[80]; time_t mtime = st.st_mtime; //文件上次修改时间
strftime(stamp, sizeof(stamp), "%Y-%m-%d %H:%M:%S", localtime(&mtime)); printf(": %s", stamp);
} printf(") ------\n");
} bool newline = false;
fd_set read_set; struct timeval tm; while (1) {
FD_ZERO(&read_set);
FD_SET(fd, &read_set); //30s无数据可读则超时
tm.tv_sec = 30;
tm.tv_usec = 0; uint64_t elapsed = nanotime(); int ret = TEMP_FAILURE_RETRY(select(fd + 1, &read_set, NULL, NULL, &tm)); if (ret == -1) { printf("*** %s: select failed: %s\n", path, strerror(errno));
newline = true; break;
} else if (ret == 0) {
elapsed = nanotime() - elapsed; printf("*** %s: Timed out after %.3fs\n", path,
(float) elapsed / NANOS_PER_SEC);
newline = true; break;
} else { char buffer[65536]; // 读取数据
ssize_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); if (bytes_read > 0) {
fwrite(buffer, bytes_read, 1, stdout);
newline = (buffer[bytes_read-1] == '\n');
} else { if (bytes_read == -1) { printf("*** %s: Failed to read from fd: %s", path, strerror(errno));
newline = true;
} break;
}
}
}
close(fd); if (!newline) printf("\n"); if (title) printf("\n");
return 0;
}当打不开文件或者出错则输出：
------ <title> (<path>) ------ *** <path>: <err>
当文件路径为/proc/或者/sys/，则输出时间/文件上次修改时间：
------ <title> (<path>: <文件修改时间>) ------
2.3.3 dump_files()
dump_files(“UPTIME MMC PERF”, mmcblk0, skip_not_stat, dump_stat_from_fd);
其中skip_not_stat是指忽略mmcblk0目录下的非stat文件，dump_files该方法遍历输出mmcblk0(即”/sys/block/mmcblk0/”)目录下所有stat文件，具体的输出调用dump_stat_from_fd方法来完成，该方法输出每个分区的读写速度：
static int dump_stat_from_fd(const char *title __unused, const char *path, int fd) { unsigned long fields[11], read_perf, write_perf; bool z; char *cp, *buffer = NULL; size_t i = 0;
FILE *fp = fdopen(fd, "rb"); //打开文件
getline(&buffer, &i, fp);
fclose(fp); if (!buffer) {
return -errno;
}
i = strlen(buffer); while ((i > 0) && (buffer[i - 1] == '\n')) {
buffer[--i] = '\0';
} if (!*buffer) { free(buffer);
return 0;
}
z = true; for (cp = buffer, i = 0; i < (sizeof(fields) / sizeof(fields[0])); ++i) {
fields[i] = strtol(cp, &cp, 0); if (fields[i] != 0) {
z = false;
}
} if (z) { /* never accessed */
free(buffer);
return 0;
} if (!strncmp(path, mmcblk0, sizeof(mmcblk0) - 1)) {
path += sizeof(mmcblk0) - 1;
} //例如输出/sys/block/mmcblk0/mmcblk0p13/stat内容
printf("%s: %s\n", path, buffer); free(buffer);
read_perf = 0; if (fields[3]) { //计算读的性能
read_perf = 512 * fields[2] / fields[3];
}
write_perf = 0; if (fields[7]) { //计算写的性能
write_perf = 512 * fields[6] / fields[7];
} printf("%s: read: %luKB/s write: %luKB/s\n", path, read_perf, write_perf); //worst_write_perf默认值为20000kb/s
if ((write_perf > 1) && (write_perf < worst_write_perf)) {
worst_write_perf = write_perf;
}
return 0;
}例如：stat文件共有11个数据：
mmcblk0p13/stat: 15 369 100 10 57 7239 5000 250 0 900 2610
则mmcblk0p13/stat的read_perf = 512* 100/10 = 5120KB/s， write_perf= 512* 5000/250 = 10240KB/s
2.3.4 dump_traces()
dump虚拟机和native的stack traces，并返回trace文件位置
const char *dump_traces() { const char* result = NULL; char traces_path[PROPERTY_VALUE_MAX] = ""; //traces_path等于/data/anr/traces.txt
property_get("dalvik.vm.stack-trace-file", traces_path, ""); if (!traces_path[0]) return NULL; char anr_traces_path[PATH_MAX];
strlcpy(anr_traces_path, traces_path, sizeof(anr_traces_path));
strlcat(anr_traces_path, ".anr", sizeof(anr_traces_path)); //文件重命名
if (rename(traces_path, anr_traces_path) && errno != ENOENT) { fprintf(stderr, "rename(%s, %s): %s\n", traces_path, anr_traces_path, strerror(errno));
return NULL; //没有权限重命令
} char anr_traces_dir[PATH_MAX];
strlcpy(anr_traces_dir, traces_path, sizeof(anr_traces_dir)); char *slash = strrchr(anr_traces_dir, '/'); if (slash != NULL) {
*slash = '\0'; //创建文件夹
if (!mkdir(anr_traces_dir, 0775)) {
chown(anr_traces_dir, AID_SYSTEM, AID_SYSTEM);
chmod(anr_traces_dir, 0775); if (selinux_android_restorecon(anr_traces_dir, 0) == -1) { fprintf(stderr, "restorecon failed for %s: %s\n", anr_traces_dir, strerror(errno));
}
} else if (errno != EEXIST) { fprintf(stderr, "mkdir(%s): %s\n", anr_traces_dir, strerror(errno));
return NULL;
}
} //创建一个新的空文件traces.txt
int fd = TEMP_FAILURE_RETRY(open(traces_path, O_CREAT | O_WRONLY | O_TRUNC | O_NOFOLLOW | O_CLOEXEC, 0666)); /* -rw-rw-rw- */
if (fd < 0) { fprintf(stderr, "%s: %s\n", traces_path, strerror(errno));
return NULL;
} int chmod_ret = fchmod(fd, 0666); if (chmod_ret < 0) { fprintf(stderr, "fchmod on %s failed: %s\n", traces_path, strerror(errno));
close(fd);
return NULL;
} // * walk /proc and kill -QUIT all Dalvik processes */
DIR *proc = opendir("/proc"); if (proc == NULL) { fprintf(stderr, "/proc: %s\n", strerror(errno)); goto error_close_fd;
} //当进程完成dump操作时，通过inotify来通知
int ifd = inotify_init(); if (ifd < 0) { fprintf(stderr, "inotify_init: %s\n", strerror(errno)); goto error_close_fd;
} int wfd = inotify_add_watch(ifd, traces_path, IN_CLOSE_WRITE); if (wfd < 0) { fprintf(stderr, "inotify_add_watch(%s): %s\n", traces_path, strerror(errno)); goto error_close_ifd;
} struct dirent *d; int dalvik_found = 0; while ((d = readdir(proc))) { int pid = atoi(d->d_name); if (pid <= 0) continue; char path[PATH_MAX]; char data[PATH_MAX]; snprintf(path, sizeof(path), "/proc/%d/exe", pid); ssize_t len = readlink(path, data, sizeof(data) - 1); if (len <= 0) { continue;
}
data[len] = '\0'; if (!strncmp(data, "/system/bin/app_process", strlen("/system/bin/app_process"))) { snprintf(path, sizeof(path), "/proc/%d/cmdline", pid); int cfd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC));
len = read(cfd, data, sizeof(data) - 1);
close(cfd); if (len <= 0) { continue;
}
data[len] = '\0'; //略过zygote，并不输出它的栈信息
if (!strncmp(data, "zygote", strlen("zygote"))) { continue;
}
++dalvik_found; uint64_t start = nanotime(); if (kill(pid, SIGQUIT)) { fprintf(stderr, "kill(%d, SIGQUIT): %s\n", pid, strerror(errno)); continue;
} /* wait for the writable-close notification from inotify */
struct pollfd pfd = { ifd, POLLIN, 0 }; int ret = poll(&pfd, 1, 5000); /* 5s超时*/
if (ret < 0) { fprintf(stderr, "poll: %s\n", strerror(errno));
} else if (ret == 0) { fprintf(stderr, "warning: timed out dumping pid %d\n", pid);
} else { struct inotify_event ie;
read(ifd, &ie, sizeof(ie));
} if (lseek(fd, 0, SEEK_END) < 0) { fprintf(stderr, "lseek: %s\n", strerror(errno));
} else {
dprintf(fd, "[dump dalvik stack %d: %.3fs elapsed]\n",
pid, (float)(nanotime() - start) / NANOS_PER_SEC);
}
} else if (should_dump_native_traces(data)) { //native进程trace
if (lseek(fd, 0, SEEK_END) < 0) { fprintf(stderr, "lseek: %s\n", strerror(errno));
} else { static uint16_t timeout_failures = 0; uint64_t start = nanotime(); /* If 3 backtrace dumps fail in a row, consider debuggerd dead. */
if (timeout_failures == 3) {
dprintf(fd, "too many stack dump failures, skipping...\n");
} else if (dump_backtrace_to_file_timeout(pid, fd, 20) == -1) {
dprintf(fd, "dumping failed, likely due to a timeout\n");
timeout_failures++;
} else {
timeout_failures = 0;
}
dprintf(fd, "[dump native stack %d: %.3fs elapsed]\n",
pid, (float)(nanotime() - start) / NANOS_PER_SEC);
}
}
} if (dalvik_found == 0) { fprintf(stderr, "Warning: no Dalvik processes found to dump stacks\n");
} static char dump_traces_path[PATH_MAX];
strlcpy(dump_traces_path, traces_path, sizeof(dump_traces_path));
strlcat(dump_traces_path, ".bugreport", sizeof(dump_traces_path)); if (rename(traces_path, dump_traces_path)) { fprintf(stderr, "rename(%s, %s): %s\n", traces_path, dump_traces_path, strerror(errno)); goto error_close_ifd;
}
result = dump_traces_path; /* replace the saved [ANR] traces.txt file */
rename(anr_traces_path, traces_path);
error_close_ifd:
close(ifd);
error_close_fd:
close(fd);
return result;
}2.3.5 do_dmesg()2.4 总结
bugreport通过socket与dumpstate服务建立通信，在dumpstate.cpp中的dumpstate()方法完成核心功能，该功能依次输出内容项， 主要分为5大类：
current log： kernel,system, event, radio;
last log： kernel, system, radio;
vm traces： just now, last ANR, tombstones
dumpsys： all, checkin, app
system info：cpu, memory, io等
从bugreport内容的输出顺序的角度，再详细列举其内容：
系统build以及运行时长等相关信息；
内存/CPU/进程等信息；
kernel log；
lsof、map及Wait-Channels；
system log；
event log；
radio log;
vm traces：
just now的栈信息；
last ANR的栈信息;(存在则输出)
tombstones信息;(存在这输出)
network相关信息；
last kernel log;
last system log;
ip相关信息；
中断向量表
property以及fs等信息
last radio log;
Binder相关信息；
dumpsys all：
dumpsys checkin相关:
dumpsys batterystats电池统计；
dumpsys meminfo内存
dumpsys netstats网络统计；
dumpsys procstats进程统计；
dumpsys usagestats使用情况；
dumpsys package.
dumpsys app相关
dumpsys activity;
dumpsys activity service all;
dumpsys activity provider all.
Tips： bugreport几乎涵盖整个系统信息，内容非常长，每一个子项都以------ xxx ------开头。 例如APP ACTIVITIES的开头便是 ------ APP ACTIVITIES (dumpsys activity all) ------，其中括号内的便是输出该信息指令，即dumpsys activity all，还有可能是内容所在节点，各个子项目类似的规律，看完前面的源码分析过程，相信你肯定能明白。下面一篇文章再进一步从bugreport内容的角度来说明其寓意。
三、相关源码
framework/native/cmds/bugreport/bugreport.cpp
framework/native/cmds/dumpstate/dumpstate.cpp
framework/native/cmds/dumpstate/utils.c
current log： kernel,system, event, radio;
last log： kernel, system, radio;
vm traces： just now, last ANR, tombstones
dumpsys： all, checkin, app
system info：cpu, memory, io等
系统build以及运行时长等相关信息；
内存/CPU/进程等信息；
kernel log；
lsof、map及Wait-Channels；
system log；
event log；
radio log;
vm traces：
just now的栈信息；
last ANR的栈信息;(存在则输出)
tombstones信息;(存在这输出)
last kernel log;last system log;dumpsys batterystats电池统计；
dumpsys meminfo内存
dumpsys netstats网络统计；
dumpsys procstats进程统计；
dumpsys usagestats使用情况；
dumpsys package.
dumpsys activity;
dumpsys activity service all;
dumpsys activity provider all.
------ xxx ------开头。 例如APP ACTIVITIES的开头便是 ------ APP ACTIVITIES (dumpsys activity all) ------，其中括号内的便是输出该信息指令，即dumpsys activity all，还有可能是内容所在节点，各个子项目类似的规律，看完前面的源码分析过程，相信你肯定能明白。下面一篇文章再进一步从bugreport内容的角度来说明其寓意。點擊查看更多內容
為 TA 點贊
評論
評論
共同學習，寫下你的評論
評論加載中...
作者其他優質文章
正在加載中
感謝您的支持，我會繼續努力的～
掃碼打賞，你說多少就多少
贊賞金額會直接到老師賬戶
支付方式
打開微信掃一掃，即可進行掃碼打賞哦